P11C-M/10G-2T BIOS Update for Mehlow Refresh and ME update tool

Please confirm current BIOS version is 0302 first, if the BIOS version is earlier than 0302 or is 300X, please upgrade or downgrade BIOS to 0302 by EzFlash. Then, refer to P11C-M-10G-2T BIOS Update Jumper SOP_English to ensure whether there is a 0 ohm resistor at OR2079 on the MB.

1. MB with 0ohm mounted on location OR2079

Please upgrade BIOS to 3101 by EzFlash.

1. MB without 0ohm mounted on location OR2079

Please refer to ‘P11C-M-10G-2T BIOS Update Jumper SOP_English’ to upgrade BIOS to 3101.

Please refer to P11C-M-10G-2T BIOS Update Jumper SOP_English for detailed information

Note: If the BIOS is upgraded to 3101, it could not be downgraded to earlier BIOS version.

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.