P11C-X; P11C-X/AUDIO; TS100-E10-PI4(WS470T) BIOS Update for Mehlow Refresh and ME update tool

Please refer to P11C-X BIOS Update Jumper SOP_English to ensure whether there is a 0 ohm resistor at OR2077 on the MB.

1. MB with 0ohm mounted on location OR2077

1. MB current BIOS 0402

Please upgrade BIOS 3003 by EzFlash first, then upgrade BIOS to 3102 by EzFlash.

2. MB current BIOS 0701

Please refer to ‘P11C-X BIOS Update Bupdater SOP_ English’ to upgrade BIOS 3003 first, then upgrade BIOS to 3102 by EzFlash.

1. MB without 0ohm mounted on location OR2077

1. MB current BIOS 0402

Please upgrade BIOS 3003 by EzFlash first, then refer ‘P11C-X BIOS Update Jumper SOP_English’ to upgrade BIOS to 3102.

2. MB current BIOS 0701

Please refer to ‘P11C-X BIOS Update Bupdater SOP_English’ to upgrade BIOS 3003 first, then refer “P11C-X BIOS Update Jumper SOP_English” to upgrade BIOS to 3102.

Please refer to P11C-X BIOS Update Bupdater SOP_English ; P11C-X BIOS Update Jumper SOP_English for detailed information

Notice

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service.
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.